MIL-F-48057 Fuze, Rocket, Pibd, M438 Sub-Assembly With DetonatorThis specification covers the quality assurance provisions and special requirements not covered by the drawings for parts and assembly of the Fuze, Rocket, P1BD, M438 Sub-Assembly with Detonator, with option of one \(1\) of two \(2\) Power Supply Sources: Thermal Battery or Magnetic Impulse Generator \(MIG\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

MIL-F-48057B(AR)

Drawing (Continued)

Type I

Part Description

Type II

Quantity

Magnetic Impulse Generator Asssembly

11830060

Power Supply

11707051

MIL-P-60949

11714370

P/N 11714370-2

Impact Switch Assembly

11714370

Fuze, Rocket, PIBD, M438, Sub-Assy

w/Detonator

9259237

11830059

Fuze, Rocket, PIBD, M438, Sub-Assy

9259262

w/Detonator and Fuze Components

(9259237)

(Fuze Function Test)

(11830059)

The first article sample for the fuze function test shall be sent to a govern-

ment designated facility to be loaded with a booster assembly in accordance

with the latest drawings and specifications. The fuzes shall then be assem-

bled to the appropriate rounds and fired in accordance with the applicable

acceptance test procedures at a testing area designated in the contract.

See MIL-A-48078 and Table I specified

4.3.2 Inspections to be performed.

herein.

4.3.3 Rejection. See MIL-A-48078.

4.3.4 Process specification plastic parts. When a multiple cavity mold

is used in the fabrication of plastic components, five (5) components from

each mold cavity shall be included in the First Article Sample. The

components shall bear a mark which identifies the component with the

individual cavities.