MIL-F-48877A (AR)
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements
(examinations and tests) as specified herein. Except as
otherwise specified in the contract or purchase order, the
contractor may use his own or any other facilities suitable for
the performance of inspection requirements specified herein,
unless disapproved by the Government. The Government reserves
the right to perform any of the inspections set forth in the
specification where such inspections are deemed necessary to
ensure supplies and services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet
all requirements of sections 3 and 5. The inspection set forth
in this specif ication shall become a part of the contractor's
overall inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve
the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance
comply with all requirements of the contract. Sampling
inspection, as a part of manufacturing operations, is an
acceptable practice to ascertain conformance to requirements,
however, this does not authorize submission of known defective
material, either indicated or actual, nor does it commit the
Government to accept defective material.
4.1.2 General provisions Unless otherwise specified
herein, the previsions of MIL-A-48078 apply and form a part of
this specification. Reference shall be made to MIL-STD-109 to
define quali ty assurance terms used herein.
T h e following types of
Classification of inspections.
on requirements specified `herein are classified
First article inspection (see 4.3) .
Quality conformance inspection (see 4.4).
First article inspection.
.1 Submission, The contractor shall submit a first
sample as designated by the Contracting Officer for
evaluation in accordance with provisions of 4.3.2. The first
article sample shall consist of the assemblies, components and
test specimens Listed below in the quantities indicated.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business