MIL-P-82691A(DS)
d.
Quality
acceptance
test
facility
(see
4.1)
e.
Inspect Ion conditions (see 4.3)
First article test
facility
and
any
additional
tests
(see
f.
4.4 and 4.4.2)
Sampling plans for acceptance tests (see 4.5. 1.1, 4.3.1.2, 6.4
9"
and 6.5)
h.
Maximum
lot
(see 4.5.2)
size
Any
i.
special packaging l nd packing (see 5.1)
Any
special
marking
(see
5.2)
J.
Safety
precautions
(see
6.7)
k. l
6.3 First article.
When a first article inspection is required,
the contracting officer should provide specific guidance to offe-
rors whether the items should be a preproduction sample,
a first
article sample,
a first production item,
a sample selected from
the
first production items,
a standard production item from the
contractor 's current inventory (see 3.2), and the number of items
tested
to be
A first article sample is
as specified in 4.4.
required from each supplier who has not produced the Mk 30 Mod 1,
2, 3 and 4. If igniter grain production has been interrupted for
more
than 6 months or changes are requested in
met-
production
hods, a
first article sample may be required.
The contracting
officer should also include specific instructions in
acquisition
documents
regarding arrangements for examinations,
approval of
first
article test results,
articles.
and disposition of first
Invitations
for bids should provide that the Government reserves
the right to waive the requirement for samples for first
article
has been
inspection
to
those bidders offering a product which
previously acquired or test ed by the Government, and that bidders
offering
such products.
who wish to rely on such production or
test ,
must
furnish evidence with the bid that prior
Government
approval is presently appropriate for the pending contract.
Bid-
ders should not submit alternate bids unless specifically reques-
ted to do so in the solicitation.
6.4
Physical property sampling. In the past
for
sampling
conformance to the requirements of 3.4 has been based on MIL-STD-
105, inspection level S-2, single sampling, normal inspection
AQL of 1.3 percent (see 4.3.1.1).
with an
for
6.5 Ballistic properties sampling. In
sampling
the past,
ballistic
testing was performed in accordance with
MIL-STD-414 ,
inspection level 1, normal inspection, single specification limit
Table B1, and an AQL of 4.0 percent (see 4.5.1.2).
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business