MIL-P-82691A(OS)
No requirement
c. Vibration:
Normal room to 95% max.
d. Humidity:
4.4
First article inspection. Unless otherwise specified in the
first article inspection is required and shall be per-
contract
formed
at
an
activity designated by the acquiring
activity.
First article inspection
shall be performed on sample units pro-
duced with equipment and procedures normally used in production.
The first article sample shall comply with all the requirements
specified herein to be accepted. Otherwise the sample shall be
rejected (see 3. 1, 4.4.1 and 6.3).
4.4.1
Sample size.
The
sample shall consist of twenty
f our
igniter propellant grains in accordance with Drawing 2217185.
4.4.2 Inspection routine.
Unless otherwise specified, the first
article sample shall be subjected to all the quality conformance
tests specified herein (see 6.2).
4.5 Quality conformance inspection.
Quality conformance inspec-
tion for acceptance of material shall
consist of all the examina-
tions of 4.6 and the tests of 4.7.
4.5.1
Sampling.
Physical properties sampling. Physical properties samples
4.5.1.1
and
shall be
selected in accordance with the contract. (see 6.2
6.4 ). The sampling
grain
plan shall be applied to the bullet
lengths.
The selected grains shall be cut to furnish the speci -
mens for the test.
4.5.1.2 Ballistics sampling. Ballistics sampling
shall
be
as
specified in the contract (see 6.2 and 6.5).
all 1
4.5.2
lot. The inspection lot shall consist of
Inspection
grains presented for acceptance at one time produced in a
single
manufacturing run under homogeneous conditions of manufacture.
and made from a single batch of propellant.
4.6
Examinations.
4.6.1 Visual. Measure each grain for compliance with 3.2. Select
a sample of grains as specified in the contract and visually
determine compliance with 3.7.
4.6.2
Radiographic. The radiographic inspection shall be in acco-
with MIL-STD-453 for compliance with the requirements of
rdance
3.5.
4.6.3 Preparation for delivery. The packaging
shall
be
examined
for conformance to the requirements of 5.
4.7
Test
procedures.
4.7.1
Performance
properties
tests.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business