MIL-F-63281A (AR)
4.
QUALITY ASSURANCE PROVISIONS.
4.1 Responsibility for inspection. Unless otherwise specified
in the contract or purchase order, the contractor is responsible for
the performance of all inspection requirements as specified herein.
Except as otherwise specified in the contract or purchase order, the
contractor may use his own or any other facilities suitable for the
performance of the inspection requirements specified herein, unless
disapproved by the Government. The Government reserves the right to
perform any of the inspections set forth in the specification where
such inspections are deemed necessary to assure supplies and
services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items must meet all
requirements of sections 3 and 5. The inspection set forth in this
specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any inspection
requirements in the specification shall not relieve the contractor
of the responsibility of assuring that all products or supplies
submitted to the Government for acceptance comply with all
requirements of the contract. Sampling in quality conformance does
not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to acceptance
of defective material.
4.2 Classification of inspection. The following types of
inspection shall be conducted on this item:
First article inspection.
a.
Quality conformance inspection.
b.
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a first article
sample as designated by the contracting officer for evaluation in
accordance with provisions of 4.3.2. The first article sample shall
consist of the following items in sample quantities as indicated:
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business