INCH-POUND
MIL-DTL-85760A (OS)
11 July 2003
SUPERSEDING
MIL-I-85760 (OS)
1 August 1986
DETAIL SPECIFICATION
IGNITER, MK 304 MOD 0
This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the manufacture and acceptance of the MK 304
MOD 0 Igniter (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements documents specified in
sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those
listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and
supplements thereto, cited in the solicitation (see 6.2).
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-331
Fuze and Fuze Components, Environmental and Performance Tests for
MIL-STD-810
Environmental Test Methods
MIL-STD-1168
Ammunition Lot Numbering and Ammunition Data Card
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this
document should be addressed to the Commander, Indian Head Division, Naval Surface Warfare Center, Engineering
Documentation Branch (Code 4230), 101 Strauss Avenue, Indian Head, MD 20640-5035, by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by sending a letter.
AMSC No. N3892
FSC 1340
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business